Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.

EUROLITE LED IP LP-120 Logo Projector

321.900 Ft 270.900 Ft (213.307 Ft + ÁFA)
Menny.:db
Szállítási díj: Ingyenes
Garancia: 3 év garancia
Raktárkészlet: Raktáron
Cikkszám: 51799301
Jelölje be azokat a kiegészítő termékeket, amiket még a kosárba szeretne tenni!
Ha részletfizetéssel vásárolná meg a terméket, helyezze a kosárba, majd a fizetési módnál jelölje be a Cofidis expressz online áruhitelt.

Leírás

Outdoor logo projector with 4 rotating, interchangeable gobos and a weekly clock timer
This weatherproof logo projector comes with three built-in colored motifs and three included black-and-white gobos for replacement. It can also be fitted with custom glass gobos. The outer diameter of the gobos is 25.8 mm, while the motif can be up to 20 mm in size. Replacing the gobos is simple and user-friendly.The gobos can rotate continuously and feature precise indexing, ensuring they are always correctly aligned. Equipped with a 120 W LED, the projector delivers strong output. It can be controlled via DMX or used in stand-alone mode. In addition, it features an integrated timer function that allows you to define exactly which gobo is displayed, in which position or rotation, at specific times and days of the week.

  • 1 LED 120 W COB (chip-on-board) cold white (CW)
  • Suitable for outdoor use IP65
  • With a beam angle of 17°
  • Built-in intelligent controller for precise timing of gobo switching, gobo rotation and brightness
  • 3 colored glass gobos (design: fireworks, snowflakes and Halloween) are pre-installed in the gobo wheel upon delivery. 3 b/w glass gobos (design: Merry Christmas, stars and smiley) are included for the fourth slot in the gobo wheel
  • Use of custom gobos is possible
  • Gobo wheel with rotating gobos, 4 gobos
    gobos changeable
  • Gobo indexable
  • Slot-in gobo system for easy gobo replacement
  • Dimmer; dimmer curves; pulse-width modulation adjustable
  • Very quiet working noise
  • The device is cooled by temperature-controlled fan
  • Flicker-free
  • With mounting bracket
  • Monochrome OLED display
  • Built with SEETRONIC connector
  • With pressure compensation membrane
  • For application areas such as: Clubs/dancing school; wedding/gala/events; Trade fair and shop fitting; installation; restaurants, bars and hotels; rental; architecture; advertisement/Shop window
  • Application possibility: Standing; suspended; on stand
  • Can be operated in 3; 5; 7 CH mode
  • Control via stand-alone; DMX; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional); master/slave function


Scope of delivery
  • 1 x device
  • 1 x user manual
  • 1 x power cord
  • 3 x gobos
  • 1 x spring washer

Manuals

Manuals

Paraméterek

Power supply 100-240 V AC, 50/60 Hz
Power consumption 100 W
IP classification IP65
Protection class Protection class I
Power connection Mains input via IP T-Con (M) mounting version power supply cord with safety plug
Cable construction 3 x 1.5 mm² H07RN-F
Lamp type LED lamp
LED type 1 x 120 W COB (chip-on-board) cold white (CW)
Flash rate 1 - 35 Hz
Equipment Gobo wheel with rotating gobos
Gobos Gobo wheel with rotating gobos, 4 gobos
Outside diameter 25.8mm
Image diameter 20mm
Gobos changeable
Gobo indexable
Shake effect
Slot-in gobo system for easy gobo replacement
Rainbow effect with adjustable speed in both directions
DMX channels 3; 5; 7
DMX input 3-pin XLR (M) mounting version IP
DMX output 3-pin XLR (F) mounting version IP
Cooling 1 x temperature-controlled fan
Control Stand-alone; DMX; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional); master/slave function
Fixtures available for Light´J; Light Captain
Projection Flicker-free
DMX fail mode Hold; blackout
Beam angle 17°
Beam angle (1/2 peak) 17°
Beam angle (1/10 peak) 17°
Color temperature 9700K
Housing color Black
Attachment system 1x mounting bracket
Display type Monochrome OLED display
USB port Type A
Diameter mounting holes 1 x Ø12mm
Use of brands Built with SEETRONIC connector
Material Aluminum casting
Dimensions Length:30 cm
Width 24 cm
Height 25.6 cm
Weight 6.30 kg
Noise classification Class 1 (very slight noise, suitable for noise-sensitive environments) depending on mode used

Youtube videók

Vélemények

Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!